NYES AUTOMOTIVE
YOUR HEADQUARTERS FOR HORSEPOWER
765-288-4326
PHONE NUMBER 765-288-4326 FAX 765-288-0408
HOURS OF OPERATION M-F 8:00 TO 5:30
E MAIL US AT NYESGUY01@YAHOO.COM
HOURS OF OPERATION M-F 8:00 TO 5:30
E MAIL US AT NYESGUY01@YAHOO.COM
At NYES AUTOMOTIVE it is our goal to build the most reliable and powerfull engine possible at a reasonable price. We only use the best equipment available from our state of the art Rottler cnc mill for block work, Rottler diamond hone, Serdi seat and guide machine, to our DTS engine dyno, we believe that we are your one stop engine shop.
Below is a list of engine combinations we frequently build. So look around and enjoy, if there is a combination you want and do not see feel free to contact us and we will be happy to discuss it with you.
Engine freshen up winter special.
The technicians at Nyes Racing Engines will disassemble your engine and completely hand wash, we will then hone block with torque plates, check main and cam bearing bore, install new cam bearings, freeze plugs, and a fresh paint job.
We will polish crank, resize rods, inspect pistons, reassemble with all new bearings, rings and gaskets.
The cylinder heads get cleaned and the valve guides checked, and perform a multi angle valve job. We then assemble the heads and shim springs properly.
The engine is fully assembled and dyno tested for proper tune up and power.
Standard parts include
Clevite h series bearings
Durabond coated cam bearings
Mahle file fit 1/16 ring pack
Felpro gasket set
Oil, filter, and fuel for dyno
Valve seals
Additional parts and services will be extra
You get a build sheet, and a dyno sheet from your engine.
THIS AMAZING OFFER FOR ONLY $1,995
The technicians at Nyes Racing Engines will disassemble your engine and completely hand wash, we will then hone block with torque plates, check main and cam bearing bore, install new cam bearings, freeze plugs, and a fresh paint job.
We will polish crank, resize rods, inspect pistons, reassemble with all new bearings, rings and gaskets.
The cylinder heads get cleaned and the valve guides checked, and perform a multi angle valve job. We then assemble the heads and shim springs properly.
The engine is fully assembled and dyno tested for proper tune up and power.
Standard parts include
Clevite h series bearings
Durabond coated cam bearings
Mahle file fit 1/16 ring pack
Felpro gasket set
Oil, filter, and fuel for dyno
Valve seals
Additional parts and services will be extra
You get a build sheet, and a dyno sheet from your engine.
THIS AMAZING OFFER FOR ONLY $1,995
Lifter bushing blow out special.
We will take your CHEVY, FORD, OR CHRYSLER block probe the existing lifter bores and then bore to the correct and angle and position and install bronze bushings, we then machine the new bushings to the proper ID for your lifters.
ALL OF THIS FOR ONLY $280.00
We will take your CHEVY, FORD, OR CHRYSLER block probe the existing lifter bores and then bore to the correct and angle and position and install bronze bushings, we then machine the new bushings to the proper ID for your lifters.
ALL OF THIS FOR ONLY $280.00
New Rottler cnc machine for the most accurate machine work possible!